This load cell is designed for rigid mount and very rugged applications. This makes it an ideal sensor for onboard weighing and any other situation where dynamic loads may be applied.
| Capacities (pounds) | 25K and 75K load cell capacities |
| Safe Overload | 150% full scale safe overload |
| Ultimate Overload | 300% full scale ultimate overload |
| Full Scale Ouput | 25K 2 mV/V +/- 0.25% FS 75K 3 mV/V +/-0.25% FS |
| Maximum Excitation | 15 volts DC |
| Operating Temp | -40°C to +80°C |
| Compensated Temp | -10°C to +40°C |
| Sealing Standard | IP-67 protected against high pressure jets of water |
| Non Linearity | 25K +/-0.05% to +/-0.1% FS 75K +/- 0.1% to +/- 0.25% FS |
| Material | 4140 / 4340 High Strength Alloy Steel |
| Portective Coating | High phosphorous, corrosion and chip resistant, industrial grade electroless nickel |
| Bridge Resistance | 700 Ohm |
 | ML-1100-25K-AXLThe main feature of this load cell is that the bolt holes are located at the bottom of the load cell which allows it to be mounted from a base beneath the load cell. Because of the design, it is the standard load cell for Massload axle pads. |
| | ML-1100-25K-WIMThe main feature of this load cell is that the bolt holes are located at the top of the load cell which allows it to be mounted from above. Because of the design, it is the standard load cell for our permanent Weight In Motion Pads. |
 | ML-1100-50K-AXLThis is a higher capacity load cell (50,000 lb). It is typically used in Massload axle pads when extra shock loading is present. |
 | ML-1200-25K-SLThis is as small shell version of the ML-1100-25k which is used in applications that require smaller load cells. |
Please click on the following links to download or view additional information:
