The TI-1500 Series Digital Indicator is a general purpose, industrial grade weight indicator featuring piece counting operation and a custom unit. Four models are currently available, distinguishable by display type and enclosure type. All models operate identically, can readout up to 50,000 display divisions and can supply enough current for up to 8-350 ohm loadcells. All setup parameters may be entered via the front panel key, including calibration.

Analog Specifications:

• Full scale input signal - 30mV, including dead load
  
• Minimum Sensitivity (non H-44) - 0.4 micro volts / grad
  
• Minimum Sensitivity (H-44) - 1.0 micro volts / grad
  
• Input impedence - 30M ohms typical
  
• Internal Resolution - approx 260,000 counts
  
• Display resolution - 50,000 display divisions max
  
• Measurement Rate - 10 measurements/second nominal
  
• System Linearity - within 0.02% FS
  
• Calibration Method - Software calibration stored in long term EEPROM
  
• Excitation Voltage - +10VDC, 8 x 350 ohm loadcells
  
• Communication - RS-232 serial port, Full duplex
  
• Operating temperature range - -10degC to +40degC
  
• Overall dimensions - 12" x 8" x 4"
  

Power:

• Standard AC Input - 110/220 VAC, 50/60Hz
  
• Optional AC Adapter - 12 VDC @ 800mA
  
• DC Power consumption - 200mA + 30mA/350 ohm loadcell
  

Approvals:

NTEP - Class III/IIIL COC 99-017
Canadian Legal Branch of Metrology - Class III Approval No.
European CE Mark - Meets test requirements for: EN55011 for class B ISM; EN50082-1 for residential, commercial, and light industrial

Software:

Massload has developed software to work with this indicator. Connect this indicator to your computer and save your data. Visit our software support page to dowload a free trial.

Retail Pricing:

Contact for pricing: contactme@massload.com

Documentation:

Download the TI1500 User Manual in .pdf format (2.3mb)