For more information

Call us Today!

North America:




Request a Quote Below:

Tension Link Dynamometer

This dynamometer load cell is suitable for tension applications such as winching, hanging crane scale, and lifting systems. Openings at either end of the crane load cell allow for easy connection to shackles, wire rope, or other rigging. These hanging scales are available in capacities ranging from 10K lb to over 250K lb. Custom dynamometer capacity, size and safety factor is also available upon request. Each tension load cell is temperature compensated and environmentally sealed.




  • Tension load cell for crane, winching, lifting, and hanging scale applications
  • Rugged design for resistance to side loading
  • Tension load accurate to 0.1% FS with multi-point calibration
  • Numerous tension capacities (10,000 lb and up)
  • Custom tension capacity available
  • Light weight and portable
  • Small size for reduced head space
  • Numerous options to display tension measurement

Additional Information

  • Documents
10K lb to 250K lb tension scales (standard models);
custom capacity tension scales available
AccuracyTension load accurate to 0.1% FS with multi-point calibration
Safe Overload200% full scale safe overload 
Ultimate Overload400% full scale ultimate overload 
Full Scale Ouput2 mV/V nominal
Maximum Excitation10 volts DC
Operating Temp-40°C to +80°C
Compensated Temp-10°C to +40°C
Sealing StandardIP-67 protected from dust and high pressure jets of water
MaterialNickel plated high strength alloy steel
Bridge Resistance350 Ohm


Tension load is displayed via external indicator that communicates wirelessly with the tension link. Wireless crane scales have a transmitter and battery box attached to the load cell to communicate with the indicator (see wireless digital indicator). The scale is powered by 3 AA batteries with a life of 200+ hours of continuous use. The tension meter enters sleep mode when not in use to prolong battery life and has wireless range of 40 meters line of sight.


Tension measurement can be displayed by an indicator via wired connection (see wired digital indicator) . The cable connection between the crane load cell and display can be a seal-over hard connect. This is suitable for installations where the dynamometer is not expected to be disconnected from the indicator. Standard cable length is 40 ft but custom cable lengths are available.


External indicators can also be connected to the tension load cell via 4-pin military style quick-disconnect. This allows for easy disconnection and reconnection from the load cell should the crane scale ever need to be moved, repaired, or stored. The drawback of military connectors is that their sealing standard is not as high as hard-wired connections. Quick Disconnect cable comes in 10 ft, 20 ft, and 50 ft lengths.


The recommended indicator for tension applications is the M2000. If the crane is located outside, the M2000 should be purchased in a NEMA enclosure (see left photo) to protect against dust and water. Various enclosures are available (see below images) and more details about the M2000 are available on the Instrument Solutions website.


The M2000 is available with a setpoint option card. These are overload detection and protection devices. Setpoints utilize solid state relays that can be used to trigger alarms or switch devices (i.e. motors) on or off at specified weights. When ordering the Setpoint option the type of device (AC or DC) being switched must be specified. Setpoints are frequently used in digital hanging crane scale applications.


The M2000 can be loaded with a special program that allows a hanging crane scale operator to adjust the indicator for multiple "Parts of Line". The program is configurable for one to twelve parts of line and the software will be provided free of charge when needed with the purchase of an M2000 indicator and a crane scale dynamometer.


Remote score boards are often referred to as "remote displays". This type of display must be used in conjunction with a digital indicator equipped with a serial output. The remote display mirrors what is displayed on the weight indicator. They are used in applications where weighing information needs to be seen at a distance from the indicator. Score boards are available in 2" (50 ft visibility), 4.5" (250 ft visibility) and 6.5" (300+ ft visibility) lettering.


We can supply 4-20 mA ouput versus standard mV/V signal. The design incorporates a load cell shield connection and polarity insensitive current loop connections. It is not susceptible to damage from shorting loop leads together or to ground during operation and is specifically designed for ESD hazardous environments. These converters are ideal for systems that require a PLC.

Please click on the following links to download or view additional information:

Request a Quote


Image Gallery