WIRELESS LOAD CELL RECEIVER
The wireless receiver can work with any digital indicator that accepts a mV/V signal (all indicators). To use the system you simply connect the wireless receiver to your indicator. When your digital indicator is turned on, the wireless receiver leaves sleep mode and sends a signal to the wireless transmitter (see wireless load cell transmitter) to also leave sleep mode. When the indicator is turned off, the wireless receiver and transmitter enters sleep mode and stop transmitting weight data. They work just like regular wire but no wires are needed between the scale and indicator!
SPECIFICATIONS
| Frequency |
900 MHz for North America; 868 MHz for Europe |
| Range |
Wireless communication of 100 to 150 feet line of sight |
| Battery |
4 AA replacable batteries |
| Battery Life |
Over 200 hours of continuous operation |
| Battery Conservation |
Hibernates when indicator is turned off (see options)
Sends a signal to hibernate the receiver |
| Sample Rate |
3 updates per second |
| Antenna |
Fully enclosed and protected |
| Calibration |
Stored in the weight indicator (up to 2 calibration points) |
| Sealing Standard |
IP-51: protected from dust and from vertical drops of water |
|
