- Versatile: The WP-233D is available
in table top, wall, or panel mount version.
- 9.5K buffer: The WP-233D will not
tie up testing equipment during transfer of data.
- RS-232 or 20mA input: Easy to install
in almost any system.
- Flexible print formats: 24-, 32-,
and 40-column printing. Programmable double high and/or
double wide characters.
- Field configurable: Setup choices
with singe rocker switch: baud rates, characters per line,
handshake settings, dot matrix pattern, double high, double
wide, double high/double wide or inverted print.
- Print method: Impact dot matrix
- Character spacing:
24 column - 12.8 characters/inch
32 column - 17 characters/inch
40 column - 21 characters/inch
- Character matrix: 5 x 8 or 5 x
5 matrix
- Character buffering: 9.5K
Line feed spacing: 7.6 lines per inch...single high character
mode
- Paper roll: Table top - 21/4"
W x 23/4" O.D.; 0.44" I.D.
- Panel mount - 21/4" W x 11/4:
O.D.
- Power: 1.5 Watts (idle) 10 Watts
(while printing)
- AC voltage: 9 VAC (120 VAC stepdown
converter included)
- DC voltage: Optional 9-12 VDC,
100 mA idle, 1.5 A typical, 2.9A peak
- Optional 12-48 VDC
- Available baud rates: 300, 600,
1200, 2400, 4800, 9600, 19200
- Character format: 7, 8 data bits,
1 or 2 stop bits, even, odd or no parity
- Environment: 5°C to 40°C
(41°F to 104°F)
- Shipping weight: 3 lbs
- Options: Time/date battery protected
circuitry
- Wall mounting versions and a watertight
enclosure are available, for both AC and DC models.
- Warranty: 1 year
|
