|
|
This system consists of two modular weighing assemblies. (see dimensional diagram) Each assembly consists of two ML1200 10k loadcells, two hydraulic lifting cylinders, and a lockdown pin and ram. This system uses a stand alone hydraulic system that connects directly to a 12 volt battery. Putting the system into either the weighing or transport modes is totally automatic. A hydraulic cylinder retracts the lockdown pins to put the system into weighing mode, springs return the pins to transport mode.
The weighing of the load is done by lifting the entire load onto the loadcells. This means that the load is not suspended on the loadcells while in transport mode, protecting them from potential damage due to the dynamic loads as the truck is in transport. When the weighing is completed, the load is let back down taking the weight off of the loadcells, and the safety lockdown pins are seated into place using springs, ensuring the load is well secured during transport.
The high resolution, double ended shearbeam loadcell in manufactured in Canada by Massload Technologies. It comes with a five year warranty, and even if not under warranty, it can be repaired for less than $500.
This system can easily be installed on many different styles of trucks. The modular assemblies make it easy to configure to your requirements.
Time is money, and using our onboard weighing system can save you both time and money.
|
