| The Floating Foot is specially
designed to work with ML100 Series Loadcells that are used on
Floor Scale and Loadbeam type applications. They are specifically
designed to reduce the end or side loading of the loadcell.
The Floating Foot is available in two materials
and two sizes as shown above. The 4K model is supplied with
1/2 - 20 UNF thread and the 10K model has 3/4 - 16 UNF thread.
The alloy steel model is Zinc Plated for high corrosion resistance.
Both the Alloy Steel Model and the Stainless Steel Models
are Heat Treated to RC 40 - 45. The assembly is held together
with Stainless Steel Pins that can be removed for cleaning
or bearing replacement.
Inside All Models of The Floating Foot cavity
is a precision ground ball bearing that is surrounded with
"Petro-Can Purity FG" Food grade grease. This grease
has a high dropping point and excellent resistance to water
wash out as well as excellent protection against corrosion.
"Purity FG" meets the highest food industry standards:
USDA H1 approved for incidental food contact applications
and FDA regulation CFR 21 178.3570. It is also certified for
use in The Floating Foot has a large foot print (2")
for maximum stability.
The Floating Foot will compensate for reasonably
uneven floor conditions.
Checkout
all our weighing assemblies
|
